Feed & EC
EC readings do not match
First compare the test methods, then compare the numbers. A supplier’s extraction result and drainage from a fertigated crop describe different samples.
Check with DripFind your next step →Feed & EC · WITH DRIP
Why test water alkalinity as well as pH for cocopeat?
Two water sources can show similar pH yet behave differently when used repeatedly.
Teral grower guidance · Updated 27 October 2026
DripYour feed & ec guideTHE COCOPEAT CONNECTION
Why the root zone matters
Alkalinity describes acid-neutralising capacity and helps explain longer-term pH effects in the root zone.
01 / OBSERVE
Three checks before you change anything
- Request total alkalinity with units
- Record water source and sampling date
- Review the result alongside the fertiliser programme
02 / NARROW IT DOWN
Which situation applies?
Choose the closest observation for a suggested next check.
High pH but unknown alkalinity
Obtain the missing analysis before designing treatment.
Changing water sources
Test the replacement before using the previous settings.
Existing treatment system
Verify the treated output and equipment settings.
03 / TAKE THE NEXT STEP
Leave with something useful
Use the water analysis to set a documented management plan.
Keep in mind
pH alone is not a reliable acid-dose calculator.
Discuss this with Teral →Further technical reading
Penn State Extension · Interpreting irrigation water tests ↗
CONNECTED QUESTIONS
